{"id":14313,"date":"2011-05-01T04:00:48","date_gmt":"2011-04-30T18:00:48","guid":{"rendered":"https:\/\/billmitchell.org\/blog\/?p=14313"},"modified":"2011-05-01T04:00:48","modified_gmt":"2011-04-30T18:00:48","slug":"saturday-quiz-april-30-2011-answers-and-discussion","status":"publish","type":"post","link":"https:\/\/billmitchell.org\/blog\/?p=14313","title":{"rendered":"Saturday Quiz &#8211; April 30, 2011 &#8211; answers and discussion"},"content":{"rendered":"<p>\t\t\t\t<![CDATA[Here are the answers with discussion for yesterday's quiz. The information provided should help you work out why you missed a question or three! If you haven't already done the Quiz from yesterday then have a go at it before you read the answers. I hope this helps you develop an understanding of modern monetary theory (MMT) and its application to macroeconomic thinking. Comments as usual welcome, especially if I have made an error.\n<!--more-->\n<strong>Question 1:<\/strong>\n\n\n<blockquote>\nNational accounting shows us that a government surplus equals a non-government deficit. If the British government is successful in putting its budget back into surplus then the private domestic sector will become more indebted as a consequence which means that austerity amounts to swapping public for private debt.<\/blockquote>\n\n\n\nThe answer is <strong>False<\/strong>.\n\nThe point is that the non-government sector is not equivalent to the private domestic sector in the sectoral balance framework. We have to include the impact of the external sector.\n\nSo this is a question about the sectoral balances &#8211; the government budget balance, the external balance and the private domestic balance &#8211; that have to always add to zero because they are derived as an accounting identity from the national accounts. The balances reflect the underlying economic behaviour in each sector which is interdependent &#8211; given this is a macroeconomic system we are considering.\n\nTo refresh your memory the balances are derived as follows. The basic income-expenditure model in macroeconomics can be viewed in (at least) two ways: (a) from the perspective of the <strong>sources<\/strong> of spending; and (b) from the perspective of the <strong>uses<\/strong> of the income produced. Bringing these two perspectives (of the same thing) together generates the sectoral balances.\n\nFrom the <strong>sources<\/strong> perspective we write:\n\nGDP = C + I + G + (X &#8211; M)\n\nwhich says that total national income (GDP) is the sum of total final consumption spending (C), total private investment (I), total government spending (G) and net exports (X &#8211; M).\n\nFrom the <strong>uses<\/strong> perspective, national income (GDP) can be used for:\n\nGDP = C + S + T\n\nwhich says that GDP (income) ultimately comes back to households who consume (C), save (S) or pay taxes (T) with it once all the distributions are made.\n\nEquating these two perspectives we get:\n\nC + S + T = GDP = C + I + G + (X &#8211; M)\n\nSo after simplification (but obeying the equation) we get the sectoral balances view of the national accounts.\n\n(I &#8211; S) + (G &#8211; T) + (X &#8211; M) = 0\n\nThat is the three balances have to sum to zero.\n\nYou can also write this as:\n\n(S &#8211; I) + (T &#8211; G) = (X &#8211; M)\n\nWhich gives an easier interpretation (especially in relation to this question).\n\nThe sectoral balances derived are:\n\n\n<ul>\n\n\n<li>The private domestic balance (S &#8211; I) &#8211; positive if in surplus, negative if in deficit.<\/li>\n\n\n\n\n<li>The Budget balance (T &#8211; G) &#8211; positive if in surplus, negative if in deficit.<\/li>\n\n\n\n\n<li>The Current Account balance (X &#8211; M) &#8211; positive if in surplus, negative if in deficit.<\/li>\n\n\n<\/ul>\n\n\n\nThese balances are usually expressed as a per cent of GDP but that doesn&#8217;t alter the accounting rules that they sum to zero, it just means the balance to GDP ratios sum to zero.\n\nUsing this version of the sectoral balance framework:\n\n(S &#8211; I) + (T &#8211; G) = (X &#8211; M)\n\nSo the domestic balance (left-hand side) &#8211; which is the sum of the private domestic sector and the government sector equals the external balance.\n\nFor the left-hand side of the equation to be positive (that is, in surplus overall) <strong>and<\/strong> the individual sectoral components to be in surplus overall, the right-hand side has to be positive (that is, an external surplus) and of sufficient magnitude.\n\nThis is also a basic rule derived from the national accounts and has to apply at all times.\n\nThe following graph and accompanying table shows a 8-period sequence where for the first four years the nation is running an external deficit (2 per cent of GDP) and for the last four year the external sector is in surplus (2 per cent of GDP).\n\n<a href=\"https:\/\/billmitchell.org\/blog\/wp-content\/uploads\/2011\/03\/Sectoral_balances_private_government_surpluses.jpg\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/billmitchell.org\/blog\/wp-content\/uploads\/2011\/03\/Sectoral_balances_private_government_surpluses.jpg\" alt=\"\" title=\"Sectoral_balances_private_government_surpluses\" width=\"686\" height=\"290\" class=\"alignnone size-full wp-image-13966\" \/><\/a>\n\n\n<div style=\"clear: both;\"><\/div>\n\n\n\nFor the question to be true we should never see the government surplus (T &#8211; G > 0) and the private domestic surplus (S &#8211; I > 0) simultaneously occurring &#8211; which in the terms of the graph will be the green and navy bars being above the zero line together.\n\nYou see that in the first four periods that never occurs which tells you that when there is an external deficit (X &#8211; M < 0) the private domestic and government sectors <strong>cannot<\/strong> simultaneously run surpluses, no matter how hard they might try. The income adjustments will always force one or both of the sectors into deficit.\n\nThe sum of the private domestic surplus and government surplus has to equal the external surplus. So that condition defines the situations when the private domestic sector and the government sector can simultaneously pay back debt.\n\nIt is only in Period 5 that we see the condition satisfied (see red circle).\n\nThat is because the private and government balances (both surpluses) exactly equal the external surplus.\n\nSo if the British government was able to pursue an austerity program with a burgeoning external sector then the private domestic sector would be able to save overall and reduce its debt levels. The reality is that this situation is not occuring.\n\nGoing back to the sequence, if the private domestic sector tried to push for higher saving overall (say in Period 6), national income would fall (because overall spending fell) and the government surplus would vanish as the automatic stabilisers responded with lower tax revenue and higher welfare payments.\n\nPeriods 7 and 8 show what happens when the private domestic sector runs deficits with an external surplus. The combination of the external surplus and the private domestic deficit adding to demand drives the automatic stabilisers to push the government budget into further surplus as economic activity is high. But this growth scenario is unsustainable because it implies an increasing level of indebtedness overall for the private domestic sector which has finite limits. Eventually, that sector will seek to stabilise its balance sheet (which means households and firms will start to save overall). That would reduce domestic income and the budget would move back into deficit (or a smaller surplus) depending on the size of the external surplus.\n\nSo what is the economics that underpin these different situations?\n\nIf the nation is running an external deficit it means that the contribution to aggregate demand from the external sector is negative &#8211; that is  net drain of spending &#8211; dragging output down.\n\nThe external deficit also means that foreigners are increasing financial claims denominated in the local currency. Given that exports represent a real cost and imports a real benefit, the motivation for a nation running a net exports surplus (the exporting nation in this case) must be to accumulate financial claims (assets) denominated in the currency of the nation running the external deficit.\n\nA fiscal surplus also means the government is spending less than it is &#8220;earning&#8221; and that puts a drag on aggregate demand and constrains the ability of the economy to grow.\n\nIn these circumstances, for income to be stable, the private domestic sector has to spend more than they earn.\n\nYou can see this by going back to the aggregate demand relations above. For those who like simple algebra we can manipulate the aggregate demand model to see this more clearly.\n\nY = GDP = C + I + G + (X &#8211; M)\n\nwhich says that the total national income (Y or GDP) is the sum of total final consumption spending (C), total private investment (I), total government spending (G) and net exports (X &#8211; M).\n\nSo if the G is spending less than it is &#8220;earning&#8221; and the external sector is adding less income (X) than it is absorbing spending (M), then the other spending components must be greater than total income.\n\nOnly when the government budget deficit supports aggregate demand at income levels which permit the private sector to save out of that income will the latter achieve its desired outcome. At this point, income and employment growth are maximised and private debt levels will be stable.\n\nThe following blogs may be of further interest to you:\n\n\n<ul>\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=7864\">Barnaby, better to walk before we run<\/a><\/li>\n\n\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=4870\">Stock-flow consistent macro models<\/a><\/li>\n\n\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=2418\">Norway and sectoral balances<\/a><\/li>\n\n\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=1801\">The OECD is at it again!<\/a><\/li>\n\n\n<\/ul>\n\n\n\n<strong>Question 2:<\/strong>\n\n\n<blockquote>\nThe relentless push by neo-liberals to cut real wages growth has allowed the share of national income going to profits to expand over the last 30 years in many nations.\n<\/blockquote>\n\n\n\nThe answer is <strong>False<\/strong>.\n\nA declining rate of real wages growth is not even a necessary condition for a falling wage share (rising profit share).\n\nAbstracting from the share of national income going to government, we can divide national income into the proportion going to workers (the &#8220;wage share&#8221;) and the proportion going to capital (the &#8220;profits share&#8221;). For the profit share to rise, the wage share has to fall (given the proportion going to government is relatively constant over time).\n\nThe wage share in nominal GDP is expressed as the total wage bill as a percentage of nominal GDP. Economists differentiate between nominal GDP ($GDP), which is total output produced at market prices and real GDP (GDP), which is the actual physical equivalent of the nominal GDP. We will come back to that distinction soon.\n\nTo compute the wage share we need to consider total labour costs in production and the flow of production ($GDP) each period.\n\nEmployment (L) is a stock and is measured in persons (averaged over some period like a month or a quarter or a year.\n\nThe wage bill is a flow and is the product of total employment (L) and the average wage (w) prevailing at any point in time. Stocks (L) become flows if it is multiplied by a flow variable (W). So the wage bill is the total labour costs in production per period.\n\nSo the wage bill = W.L\n\nThe wage share is just the total labour costs expressed as a proportion of $GDP &#8211; (W.L)\/$GDP in nominal terms, usually expressed as a percentage.  We can actually break this down further.\n\nLabour productivity (LP) is the units of real GDP per person employed per period. Using the symbols already defined this can be written as:\n\nLP = GDP\/L\n\nso it tells us what real output (GDP) each labour unit that is added to production produces on average.\n\nWe can also define another term that is regularly used in the media &#8211; the real wage &#8211; which is the purchasing power equivalent on the nominal wage that workers get paid each period. To compute the real wage we need to consider two variables: (a) the nominal wage (W) and the aggregate price level (P).\n\nWe might consider the aggregate price level to be measured by the consumer price index (CPI) although there are huge debates about that. But in a sense, this macroeconomic price level doesn&#8217;t exist but represents some abstract measure of the general movement in all prices in the economy.\n\nMacroeconomics is hard to learn because it involves these abstract variables that are never observed &#8211; like the price level, like &#8220;the interest rate&#8221; etc. They are just stylisations of the general tendency of all the different prices and interest rates.\n\nNow the nominal wage (W) &#8211; that is paid by employers to workers is determined in the labour market &#8211; by the contract of employment between the worker and the employer. The price level (P) is determined in the goods market &#8211; by the interaction of total supply of output and aggregate demand for that output although there are complex models of firm price setting that use cost-plus mark-up formulas with demand just determining volume sold. We shouldn&#8217;t get into those debates here.\n\nThe inflation rate is just the continuous growth in the price level (P). A once-off adjustment in the price level is not considered by economists to constitute inflation.\n\nSo the real wage (w) tells us what volume of <strong>real<\/strong> goods and services the nominal wage (W) will be able to command and is obviously influenced by the level of W and the price level. For a given W, the lower is P the greater the purchasing power of the nominal wage and so the higher is the real wage (w).\n\nWe write the real wage (w) as W\/P. So if W = 10 and P = 1, then the real wage (w) = 10 meaning that the current wage will buy 10 units of real output. If P rose to 2 then w = 5, meaning the real wage was now cut by one-half.\n\nSo the proposition in the question &#8211; that nominal wages grow faster than inflation &#8211; tells us that the real wage is rising.\n\nNominal GDP ($GDP) can be written as P.GDP, where the P values the real physical output.\n\nNow if you put of these concepts together you get an interesting framework. To help you follow the logic here are the terms developed and be careful not to confuse $GDP (nominal) with GDP (real):\n\n\n<ul>\n\n\n<li>Wage share = (W.L)\/$GDP<\/li>\n\n\n\n\n<li>Nominal GDP: $GDP = P.GDP<\/li>\n\n\n\n\n<li>Labour productivity: LP = GDP\/L<\/li>\n\n\n\n\n<li>Real wage: w = W\/P<\/li>\n\n\n<\/ul>\n\n\n\nBy substituting the expression for Nominal GDP into the wage share measure we get:\n\nWage share = (W.L)\/P.GDP\n\nIn this area of economics, we often look for alternative way to write this expression &#8211; it maintains the equivalence (that is, obeys all the rules of algebra) but presents the expression (in this case the wage share) in a different &#8220;view&#8221;.\n\nSo we can write as an equivalent:\n\nWage share &#8211; (W\/P).(L\/GDP)\n\nNow if you note that (L\/GDP) is the inverse (reciprocal) of the labour productivity term (GDP\/L). We can use another rule of algebra (reversing the invert and multiply rule) to rewrite this expression again in a more interpretable fashion.\n\nSo an equivalent but more convenient measure of the wage share is:\n\nWage share = (W\/P)\/(GDP\/L) &#8211; that is, the real wage (W\/P) divided by labour productivity (GDP\/L).\n\nI won&#8217;t show this but I could also express this in growth terms such that if the growth in the real wage equals labour productivity growth the wage share is constant. The algebra is simple but we have done enough of that already.\n\nThat journey might have seemed difficult to non-economists (or those not well-versed in algebra) but it produces a very easy to understand formula for the wage share.\n\nTwo other points to note. The wage share is also equivalent to the real unit labour cost (RULC) measures that Treasuries and central banks use to describe trends in costs within the economy. Please read my blog &#8211; <a href=\"https:\/\/billmitchell.org\/blog\/?p=9713\">Saturday Quiz &#8211; May 15, 2010 &#8211; answers and discussion<\/a> &#8211; for more discussion on this point.\n\nNow it becomes obvious that if the nominal wage (W) grows faster than the price level (P) then the real wage is growing. But that doesn&#8217;t automatically lead to a growing wage share. So the blanket proposition stated in the question is <strong>false<\/strong>.\n\nIf the real wage is growing at the same rate as labour productivity, then both terms in the wage share ratio are equal and so the wage share is constant.\n\nIf the real wage is growing but labour productivity is growing faster, then the wage share will fall.\n\nOnly if the real wage is growing faster than labour productivity , will the wage share rise.\n\nThe wage share was constant for a long time during the Post Second World period and this constancy was so marked that Kaldor (the Cambridge economist) termed it one of the great &#8220;stylised&#8221; facts. So real wages grew in line with productivity growth which was the source of increasing living standards for workers.\n\nThe productivity growth provided the &#8220;room&#8221; in the distribution system for workers to enjoy a greater command over real production and thus higher living standards without threatening inflation.\n\nSince the mid-1980s, the neo-liberal assault on workers&#8217; rights (trade union attacks; deregulation; privatisation; persistently high unemployment) has seen this nexus between real wages and labour productivity growth broken. So while real wages have been stagnant or growing modestly, this growth has been dwarfed by labour productivity growth.\n\nSo the question is false because you have to consider labour productivity growth in addition to real wages growth before you can make conclusions about the movements in factor shares in national income.\n\nThe following blog may be of further interest to you:\n\n\n<ul>\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=277\">The origins of the economic crisis<\/a><\/li>\n\n\n<\/ul>\n\n\n\n<strong>Question 3:<\/strong>\n\n\n<blockquote>\nIf the stock of aggregate demand growth outstrips the capacity of the productive sector to respond by producing extra real goods and services then inflation is inevitable.\n<\/blockquote>\n\n\n\nThe answer is <strong>False<\/strong>.\n\nSpending definitely equals income and too much spending relative to the real capacity of the economy to absorb it will create inflation. But those facts do not relate to the point of the question, which is, in fact, a very easy test of the difference between flows and stocks.\n\nAll expenditure aggregates &#8211; such as government spending and investment spending are flows. They add up to total expenditure or aggregate demand which is also a flow rather than a stock. Aggregate demand (a flow) in any period and it jointly determines the flow of income and output in the same period (that is, GDP) (in partnership with aggregate supply).\n\nSo while flows can add to stock &#8211; for example, the flow of saving adds to wealth or the flow of investment adds to the stock of capital &#8211; flows can also be added together to form a &#8220;larger&#8221; flow.\n\nFor example, if you wanted to work out annual GDP from the quarterly national accounts you would <strong>sum<\/strong> the individual quarterly observations for the 12-month period of interest. Conversely, employment is a stock so if you wanted to create an annual employment time series you would <strong>average<\/strong> the individual quarterly observations for the 12-month period of interest.\n\nThe question thus tests the precision of language as they relate to economic concepts. Too often the language is loose and the concepts become confused as a result.\n\nThe following blog may be of further interest to you:\n\n\n<ul>\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=4870\">Stock-flow consistent macro models<\/a><\/li>\n\n\n<\/ul>\n\n\n\n<strong>Question 4:<\/strong>\n\n\n<blockquote>\nThe Australian dollar is currently appreciating strongly against many of the key currencies and this has put pressure on our international competitiveness. Export competitiveness will be restored under these conditions if local workers accept a cut in nominal wages and the rate of inflation is contained.\n<\/blockquote>\n\n\n\nThe answer is <strong>False<\/strong>.\n\nThis question also applies to the EMU nations who cannot adjust their nominal exchange rate but are seeking export-led demand boosts as they cut government spending.\n\nThe temptation is to accept the dominant theme that is emerging from the public debate &#8211; that the appreciating dollar requires tighter domestic wage and price conditions.\n\nHowever, deflating an economy under these circumstance will not guarantee that a nation&#8217;s external competitiveness will be increased.\n\nWe have to differentiate several concepts: (a) the nominal exchange rate; (b) domestic price levels; (c) unit labour costs; and (d) the real or effective exchange rate.\n\nIt is the last of these concepts that determines the &#8220;competitiveness&#8221; of a nation. This <a href=\"http:\/\/www.boj.or.jp\/en\/type\/exp\/stat\/exrate.htm\">Bank of Japan explanation<\/a> of the real effective exchange rate is informative. Their English-language services are becoming better by the year.\n\n<u>Nominal exchange rate (e)<\/u><br \/>\n\nThe nominal exchange rate (<em>e<\/em>) is the number of units of one currency that can be purchased with one unit of another currency. There are two ways in which we can quote a bi-lateral exchange rate. Consider the relationship between the $A and the $US.\n\n\n<ul>\n\n\n<li>The amount of Australian currency that is necessary to purchase one unit of the US currency ($US1) can be expressed. In this case, the $US is the (one unit) reference currency and the other currency is expressed in terms of how much of it is required to buy one unit of the reference currency. So $A1.60 = $US1 means that it takes $1.60 Australian to buy one $US.<\/li>\n\n\n\n\n<li>Alternatively, <em>e<\/em> can be defined as the amount of US dollars that one unit of Australian currency will buy ($A1). In this case, the $A is the reference currency. So, in the example above, this is written as  $US0.625= $A1. Thus if it takes $1.60 Australian to buy one $US, then 62.5 cents US buys one $A. (i) is just the inverse of (ii), and vice-versa.<\/li>\n\n\n<\/ul>\n\n\n\nSo to understand exchange rate quotations you must know which is the reference currency. In the remaining I use the first convention so <em>e<\/em> is the amount of $A which is required to buy one unit of the foreign currency.\n\n<u>International competitiveness<\/u>\n\nAre Australian goods and services becoming more or less competitive with respect to goods and services produced overseas? To answer the question we need to know about:\n\n\n<ul>\n\n\n<li>movements in the exchange rate, <em>e<\/em>e; and<\/li>\n\n\n\n\n<li>relative inflation rates (domestic and foreign).<\/li>\n\n\n<\/ul>\n\n\n\nClearly within the EMU, the nominal exchange rate is fixed between nations so the changes in competitiveness all come down to the second source and here foreign means other nations within the EMU as well as nations beyond the EMU.\n\nThere are also non-price dimensions to competitiveness, including quality and reliability of supply, which are assumed to be constant.\n\nWe can define the ratio of domestic prices (P) to the rest of the world (Pw) as Pw\/P.\n\nFor a nation running a flexible exchange rate, and domestic prices of goods, say in the USA and Australia remaining unchanged, a depreciation in Australia&#8217;s exchange means that our goods have become relatively cheaper than US goods. So our imports should fall and exports rise. An exchange rate appreciation has the opposite effect which is what is occurring at present.\n\nBut this option is not available to an EMU nation so the only way goods in say Greece can become cheaper relative to goods in say, Germany is for the relative price ratio (Pw\/P) to change:\n\n\n<ul>\n\n\n<li>If Pw is rising faster than P, then Greek goods are becoming relatively cheaper within the EMU; and<\/li>\n\n\n\n\n<li>If Pw is rising slower than P, then Greek goods are becoming relatively more expensive within the EMU.<\/li>\n\n\n<\/ul>\n\n\n\nThe inverse of the relative price ratio, namely (P\/Pw) measures the ratio of export prices to import prices and is known as the terms of trade.\n\n<u>The real exchange rate<\/u>\n\nMovements in the nominal exchange rate and the relative price level (Pw\/P) need to be combined to tell us about movements in relative competitiveness. The real exchange rate captures the overall impact of these variables and is used to measure our competitiveness in international trade.\n\nThe real exchange rate (R) is defined as:\n\nR = (e.Pw\/P)   (2)\n\nwhere P is the domestic price level specified in $A, and Pw is the foreign price level specified in foreign currency units, say $US.\n\nThe real exchange rate is the ratio of prices of goods abroad measured in $A (ePw) to the $A prices of goods at home (P). So the real exchange rate, R adjusts the nominal exchange rate, e for the relative price levels.\n\nFor example, assume P = $A10 and Pw = $US8, and e = 1.60. In this case R = (8\u00d71.6)\/10 = 1.28. The $US8 translates into $A12.80 and the US produced goods are more expensive than those in Australia by a ratio of 1.28, ie 28%.\n\nA rise in the real exchange rate can occur if:\n\n\n<ul>\n\n\n<li>the nominal <em>e<\/em> depreciates; and\/or<\/li>\n\n\n\n\n<li>Pw rises more than P, other things equal.<\/li>\n\n\n<\/ul>\n\n\n\nA rise in the real exchange rate should increase our exports and reduce our imports.\n\nA fall in the real exchange rate can occur if:\n\n\n<ul>\n\n\n<li>the nominal e appreciates; and\/or<\/li>\n\n\n\n\n<li>Pw rises less than P, other things equal.<\/li>\n\n\n<\/ul>\n\n\n\nA fall in the real exchange rate should reduce our exports and increase our imports.\n\nIn the case of the EMU nation we have to consider what factors will drive Pw\/P up and increase the competitive of a particular nation.\n\nIf prices are set on unit labour costs, then the way to decrease the price level relative to the rest of the world is to reduce unit labour costs faster than everywhere else.\n\nUnit labour costs are defined as cost per unit of output and are thus ratios of wage (and other costs) to output. If labour costs are dominant (we can ignore other costs for the moment) so total labour costs are the wage rate times total employment = w.L. Real output is Y.\n\nSo unit labour costs (ULC) = w.L\/Y.\n\nL\/Y is the inverse of labour productivity(LP) so ULCs can be expressed as the w\/(Y\/L) = w\/LP.\n\nSo if the rate of growth in wages is faster than labour productivity growth then ULCs rise and vice-versa. So one way of cutting ULCs is to cut wage levels which is what the austerity programs in the EMU nations (Ireland, Greece, Portugal etc) are attempting to do.\n\nBut LP is not constant. If morale falls, sabotage rises, absenteeism rises and overall investment falls in reaction to the extended period of recession and wage cuts then productivity is likely to fall as well. Thus there is no guarantee that ULCs will fall by any significant amount.\n\nFurther, the reduction in nominal wage levels threatens the contractual viability of workers (with mortgages etc). It is likely that the cuts in wages would have to be so severe that widespread mortgage defaults etc would result. The instability that this would lead to makes the final outcome uncertain.\n\nGiven all these qualifications, the answer is false. External competitive <strong>will<\/strong> not be automatically restored by deflating nominal wages and price levels.\n\nYou might like to read this blog for further information:\n\n\n<ul>\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=7909\">Doomed from the start<\/a><\/li>\n\n\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=12061\">Wealth effects &#8211; been down that road before<\/a><\/li>\n\n\n<\/ul>\n\n\n\n<strong>Premium Question 5:<\/strong>\n\n\n<blockquote>\nThe US Federal Reserve this week put out its updated projections which provide &#8220;central tendency&#8221; estimates of real GDP growth between 3.5 and 4.3 per cent in 2013. Their lowest estimate for 2013 was 3 per cent per annum. Assuming the current labour productivity growth continues (around 2 per cent per annum) and the labour force growth resumes more normal rates (around 1.4 per cent per annum) by 2013 and the average working week is constant in hours, then one consequence of the difference between the lower bound of the central tendency projections and their lowest estimate will be that the unemployment rate will fall more slowly in 2013 if the the latter projection is true.\n<\/blockquote>\n\n\n\nThe answer is <strong>False<\/strong>.\n\nThe facts were:\n\n\n<ul>\n\n\n<li>Real GDP growth projection 3.5 per cent compared to 3 per cent in 2013.<\/li>\n\n\n\n\n<li>Labour productivity growth (that is, growth in real output per person employed) growing at 2 per cent per annum. So as this grows less employment in required per unit of output.<\/li>\n\n\n\n\n<li>The labour force is growing by 1.4 per cent per annum. Growth in the labour force adds to the employment that has to be generated for unemployment to stay constant (or fall).<\/li>\n\n\n\n\n<li>The average working week is constant in hours. So firms are not making hours adjustments up or down with their existing workforce. Hours adjustments alter the relationship between real GDP growth and persons employed.<\/li>\n\n\n<\/ul>\n\n\n\nWe need a method of relating the projections of real GDP growth into labour market outcomes. The late Arthur Okun is famous (among other things) for estimating the relationship that links the percentage deviation in real GDP growth from potential to the percentage change in the unemployment rate &#8211; the so-called Okun&#8217;s Law.\n\nThe algebra underlying this law can be manipulated to estimate the evolution of the unemployment rate based on real output forecasts.\n\nFrom Okun, we can relate the major output and labour-force aggregates to form expectations about changes in the aggregate unemployment rate based on output growth rates. A series of accounting identities underpins Okun&#8217;s Law and helps us, in part, to understand why unemployment rates have risen.\n\nTake the following output accounting statement:\n\n(1) Y = LP*(1-UR)LH\n\nwhere Y is real GDP, LP is labour productivity in persons (that is, real output per unit of labour), H is the average number of hours worked per period, UR is the aggregate unemployment rate, and L is the labour-force. So (1-UR) is the employment rate, by definition.\n\nEquation (1) just tells us the obvious &#8211; that total output produced in a period is equal to total labour input [(1-UR)LH] times the amount of output each unit of labour input produces (LP).\n\nUsing some simple calculus you can convert Equation (1) into an approximate dynamic equation expressing percentage growth rates, which in turn, provides a simple benchmark to estimate, for given labour-force and labour productivity growth rates, the increase in output required to achieve a desired unemployment rate.\n\nAccordingly, with small letters indicating percentage growth rates and assuming that the average number of hours worked per period is more or less constant, we get:\n\n(2) y = lp + (1 &#8211; ur) + lf\n\nRe-arranging Equation (2) to express it in a way that allows us to achieve our aim (re-arranging just means taking and adding things to both sides of the equation):\n\n(3) ur = 1 + lp + lf &#8211; y\n\nEquation (3) provides the approximate rule of thumb &#8211; if the unemployment rate is to remain constant, the rate of real output growth must equal the rate of growth in the labour-force plus the growth rate in labour productivity.\n\nIt is an approximate relationship because cyclical movements in labour productivity (changes in hoarding) and the labour-force participation rates can modify the relationships in the short-run. But it provides reasonable estimates of what happens when real output changes.\n\nThe sum of labour force and productivity growth rates is referred to as the required real GDP growth rate &#8211; required to keep the unemployment rate constant.\n\nRemember that labour productivity growth (real GDP per person employed) reduces the need for labour for a given real GDP growth rate while labour force growth adds workers that have to be accommodated for by the real GDP growth (for a given productivity growth rate).\n\nSo in the example, the required real GDP growth rate is 3.4 per cent per annum.\n\nIf the lowest bound of the central tendency estimates (3.5 per cent in 2013) are correct then the national unemployment rate (under our assumptions) would decline by a miserly 0.1 points in 2013.\n\nIf the lowest real GDP growth estimate overall (3 per cent in 2013) is correct then the rate of real GDP growth is below the required rate to keep the unemployment rate constant and the unemployment rate would rise by 0.4 per cent in 2013.\n\nThe rising unemployment rate would reflect the fact that real output growth was not strong enough to both absorb the new entrants into the labour market and offset the employment losses arising from labour productivity growth.\n\nThe following blogs may be of further interest to you:\n\n\n<ul>\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=7609\">What do the IMF growth projections mean?<\/a><\/li>\n\n\n\n\n<li><a href=\"https:\/\/billmitchell.org\/blog\/?p=14291\">US Federal Reserve chairman loses his independence<\/a><\/li>\n\n\n<\/ul>\n\n]]>\t\t<\/p>\n","protected":false},"excerpt":{"rendered":"<p>\t\t\t\t<![CDATA[]]>\t\t<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[58],"tags":[],"class_list":["post-14313","post","type-post","status-publish","format-standard","hentry","category-saturday-quiz","entry","no-media"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=\/wp\/v2\/posts\/14313","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=14313"}],"version-history":[{"count":0,"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=\/wp\/v2\/posts\/14313\/revisions"}],"wp:attachment":[{"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=14313"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=14313"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/billmitchell.org\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=14313"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}